New ChaseHepta Lowers the Force
to Increase Productivity
Positive Multi Corners Milling Line Ideal Choice of Low Powered Machines
January 15, 2016 – With the increasing popularity of small machining centers, TaeguTec has launched a new single-sided, positive seven-corner insert line that generates less cutting force.
As the new offering in TaeguTec’s milling line, the ChaseHepta insert generates low cutting force, achieves smooth machining and greater economy due to its seven corner and helical cutting edges.
Additionally, the ChaseHepta’s higher insert thickness means better resistance to shock and breakage; a feature that makes this tool overcome the primary weakness of single-sided positive inserts.
The new line is available in two geometries; the “M” type for steel and cast iron and the “ML” type for stainless steel and difficult-to-cut materials.
The line’s cutters have a 45 degree entering angle, a 3.2 millimeter maximum depth of cut and an 18 degree axial rake angle which lowers the cutting forces during machining.
Also, the ChaseHepta cutters are designed with an acute angle pocket for rigid clamping and have an interference free structure for side cutting or helical ramping.
They are available in end-mills (D32-50 mm) as well as face mill types (D32-125 mm) covering not only general face milling but ramping and profiling proving its advantage as a multipurpose tool.
During the testing phase of both chip breakers, ChaseHepta outlasted the competition. On stainless steel, TaeguTec recorded a tool life increase of 43 percent when the ChaseHepta “ML” chip breaker was applied versus a leading competitor’s similar offering while tests on cast iron using the “M” chip breaker recorded increases of 100 percent to 150 percent increase in tool life.
For more information, contact your local TaeguTec representative. For a list of TaeguTec sellers, visit the company’s official website at www.taegutec.com